Patriotic appliqued cushion cover

I love it when I get inspired!

I was looking through my fabric stash the other day wondering what I could make next - don't worry, there are a million and one projects that I *plan* to make, it really just depends on the order!

So I find a preloved denim skirt to upcycle.  Then I spotted a red shirt with the dinkiest little daisies all over it.  Hmmm.  It's looking rather British to me.  So I add a preloved tablecloth and the idea is beginning to form.

I have enough denim to make a cushion cover, thinks I, and I haven't appliqued anything in a while.

Yes, I will make a cushion cover with the Union Jack on it.

It was great fun seeing it all come together, even though the tablecloth fabric did begin to look like an octopus before I had appliqued it to the denim - there were 'arms' everywhere!

The back was made with a tuck-in design.  I did consider adding Velcro (not quite the look I was after) and/or a button, but thought that that might be a bit uncomfortable in the middle of the back!

And this is the skirt that the main fabric came from.  Just so you know!

I do love a fun project!!

Next...

A quilted cushion cover

Many moons ago I took a soft-furnishings evening class.  I loved it.  The teacher was wonderfully supportive and believed that everybody could sew - which is the case - it's all about learning techniques and playing - well, that's how I do it anyway!

One of the projects was to learn to quilt and then make that into a cushion cover.  I chose the fabric because my eldest was tiny at the time.  She's now a teenager LOL!

This was the first time I'd put a zip in - ok it's a little wiggly but not a bad attempt!  I always used to worry about zips - I'd been told that it was really difficult - but it's all a matter of knowing *how*.  Once you know, it's easy peasy - honest!

 

 

Furry cushion covers

I had some cushion inners that were looking a bit sorry for themselves - they were sitting in a pillowcase of all things!

So I looked at them with fresh eyes and thought, hey, I can sew, what fabric do I have lying around that would make great cushion covers?

I had a bit of a rummage and came up with an off-cut of fur that I'd bought from a fabric shop.

Fur is always fun to play with - cutting it does get rather interesting when the cut fluff starts to fly everywhere! 

But I'm happy with the way they turned out! 

And it's something fluffy to hold onto when Doctor Who comes on!

Cushion cover bag

So you find a wooden handled bag which has a stain on the fabric but you buy it anyway because you know those handles will come in handy at some point.

Then you spot a rather fetchingly thick cushion cover that appeals - you know it's a rather good one because it has a few real soft downy feathers still inside.

Then you come across a rather sumptuous throw.

And a zip...

Put them all together and what do you get...

Why, a cushion cover bag of course!

 

The interior is made from silk from the middle of the throw.  How do I know it's silk?  From the way it smells like pork scratchings when you set light to a little piece LOL (a real test, apparently!) 

The bag itself also has a zipped pocket for all your bits and pieces.  And those wooden handles are really comfy to hold too!

I had so much fun making this one!!

ROAR!!!! Dinosaur cushions...

What do you do with fabric leftover from curtain-making?

Well, make cushion covers out of them of course!
So when a friend asked me if I would do that very same thing I could not resist.

When the fabric arrived it had the most amazing dinosaur print on it.  I had so much fun trying to decide which part of the fabric to feature on the front!

I added a zip, a piece of fabric for the back and ta-dah - they were done!

How to make... cushion covers

I recently took up some curtains and made the excess fabric into a pair of cushion covers. 

Why waste good fabric, that's what I say!

So here's a 'How to...'

What you will need:

Sewing machine
Zip foot
Tape measure
Pins
Zip (about two thirds the width of the cushion) - ask for a 'closed end zip'
Matching thread
Unpicker (really useful)
Tailor's chalk (or a pencil, whichever you prefer!)
Scissors
Calculator or pen and paper
Tea (copious amount)


Here's what I did:

1
Measure the front of one of the cushions from side to side to find the right size and then add on one inch to this measurement to allow for seams.  Keep it somewhere safe.

2
Then do the same for the top to bottom measurement.

3
Cut fabric to this size

4
Using a wide zig zag stitch, sew around all of the raw edges about a quarter of an inch in.  This will prevent your lovely cushion covers from fraying.  Repeat for both pieces of fabric.

5
Pin both pieces of fabric, right sides together, along the top edges (it didn't matter too much with this fabric as it was the same on both sides but will make a difference if the fabric is patterned)

6
Measure zip from metal top to metal bottom (there's probably a technical name but it escapes me!) and ensure it works by pulling it up and down a couple of times :)

7
*Easy Maths alert*
Grab a calculator and do the following sum:

Meaurement from step 1

minus

zip measurement from step 5

then

divide by 2

This will give you the distance from each side that you need to mark - it's where the zip opening will go.

7
Sit down and have a cup of tea to recover.

8
All set?  Ok, let's move on -

Sew a straight seam along the top of the fabric, half an inch down from the top.  When you get close to the zip opening mark, do a couple of backstitches to secure the thread but do not cut.

9
Increase the length of the stitch to the widest possible and continue with the seam until you get to the other zip opening mark.  Backstitch a couple of times, shorten the stitch length again and continue to the end. 

What you've just done in the last couple of steps is to tack (or 'baste') the fabric together where the zip will go - don't worry, it will become clearer as we go along!

10
Open out the fabric, with the inside of the cushion cover up, press the seam flat.

11
Turn the cushion cover over and put a pin in where you had marked the zip opening so that you can find it again

12
Take your zip and place it underneath the zip opening with the metal top near the pin.  Start to pin the zip in place.  Feel through the fabric to ensure it's centred and continue to pin down both sides of the zip.

13
Change your sewing machine foot to a zip foot

14
Begin to sew from the end of one zip along the side taking out the pins just before you get to them.  Keep your fingers on the zip as you go along to ensure it's still in the middle.

15
When you get to the end of the zip, leave your needle in the fabric, lift the foot up and pivot the fabric 90 degrees.  Sew along the end of the zip and then pivot again so that you can now sew down the other side.

16
Sew along the other side of the zip and then finish off at the other end.

17
Using your unpicker, unpick the tacking stitches along the zip and pull out any loose threads.

18
Check your zip works.  It does?  Well, of course it does!  Excellent!!!

19
Another cup of tea is in order and maybe even a snack!  Now you've put in the zip you're nearly home and dry!

20
Ok, so now you will want to open the zip and leave it OPEN for the time being.

21
Change your foot to a normal foot then fold the cushion cover in half so that the outside edges are touching.  Pin along all three edges.

22
Sew along the edges, half an inch in, pivoting at each corner

23
Take the scissors and cut across the bottom corners in the seam allowance making sure you don't cut into the stitching.  This will make it easier to have crisp corners when you turn it the right way round.

24
Snip off any loose ends.

25
Turn the cushion cover the right way out using a turning tool to gently encourage pointy corners (oh wait, I used a blunt pencil, that did the same thing!)

26
Press the cushion cover and insert cushion pad.

27
That's it!
You've done it!  Give yourself a huge pat on the back!
Must be lunch-time by now or at least another-cup-of-tea-time!




Let me know how you get on!

How to use an Ikea throw

I'm the kind of girl who thinks that texture and fabric is really important.  So when I spotted a bright red fleece throw with a wonderfully cut-out border, I just knew that it had to come home with me.

But after a while I decided to convert it to a skirt (as you do!) 

It was super easy as it didn't fray so I just sewed up the back, added some elastic and wore it!

The story isn't over... it was too hot to wear as a skirt and it clung to my legs.  So it is now being used as a cushion cover and as a fleecey lining for the mini-bucket bag I made earlier. 

I have some more of the throw fabric just crying out to be used on my next project!